GearZ Community
Register Calendar Latest Topics Chat
 
 
 


Reply
  Author   Comment  
Bumpers8503

Junior Member
Registered:
Posts: 3
Reply with quote  #1 
I have an '84 C10 that the turn signal doesn't work. I am getting 12V to the fuse in fuse block.

Just wondering if anyone knew any shortcuts for these Squarebody GM Trucks.

Thanks!
0
Kurganhunter

Avatar / Picture

Senior Member
Registered:
Posts: 106
Reply with quote  #2 
You said " signal". is it both? Does everything else work electrically? Did you check the wires to the column plug, and the flasher itself? From the load side of the fuse it would go to the column harness then back down to the flasher (also on the fuse block) then out to the respective signal. There are 2 flashers. 1 for turn signals and 1 for 4-ways. Check all of that.This should be a good starting point. Good luck
0
Bumpers8503

Junior Member
Registered:
Posts: 3
Reply with quote  #3 
Thanks for the information I will start with it tomorrow when I go to look at it. Yes it's both signals no work, but all my lights work with the headlight switch on.
0
margeo69

Junior Member
Registered:
Posts: 5
Reply with quote  #4 
I have a 64 C10, and with mine it was poorly grounded housings. 
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.